Barco R9841020 Cine VERSUM Master, Руководство по установке

Страница: 42 / 161

6. Installation Guidelines
6.1.2.4 Projector installation requirements
Cine VERSUM 80: Installation requirements
• Position the projector perpendicular to the screen and leveled to achieve an optimal image. An inclination of the projector is
allowed but limited to 10° in one direction (. The latter generates image distortion (keystoned) which can be corrected using
the projector’s menu system.
• The projector lens should be centered horizontally in the middle of the screen (Vertical shift of the lens built-in).
• Position the screen so that it is not in direct sunlight or room light. Light falling directly onto the screen washes out the colors,
making viewing difficult. Close the curtains and dim the lights when setting up the screen in a sunny or bright room.
• A polarizing screen cannot be used with this projector.
The maximum mounting inclination angle for the projector is 10°.
Image 6-6
Projector inclination angle
1 Ceiling mounted projector
2 Table installed projector
Cine VERSUM 120: Installation requirements
• Position the projector perpendicular to the screen and leveled to achieve an optimal image. An inclination of the projector is
allowed but limited due to the maximum keystone correction range.
• A swing of the projector is limited to 10° in both directions (due to the lamp position in the projector).
• The projector lens should be centered horizontally in the middle of the screen (Vertical and Horizontal shift of the lens built-in).
• Position the screen so that it is not in direct sunlight or room light. Light falling directly onto the screen washes out the colors,
making viewing difficult. Close the curtains and dim the lights when setting up the screen in a sunny or bright room.
• A polarizing screen cannot be used with this projector.
The maximum mounting swing angle for the projector is 10°.
10° 10°
10°
10°
1
2
Image 6-7
Projector swing angle
1 Table installed projector
2 Ceiling mounted projector
6.1.2.5 Lens Control
Cine VERSUM 80: Using the provided Lens vertical Shift control
The picture can be adjusted vertically within the shift range of the lens by rotation the lens shift screw on top of the projector (below
top cover) using a flat screwdriver or by hand to match the setup configuration.
The vertical lens shift range is +100% and –100% with respect to the optical axis of the projection lens (Tilting the projector will
reduce the effectiveness of the lens shift function).
38 R5976468 CINE VERSUM SYSTEM 03112003