Barco R9040411, Руководство пользователя

Страница: 77 / 209

5. Advanced
When a new source corresponds to one of these fi les, a custom fi le is created. The custom fi le is automatically saved if a setting is
altered (contrast, ...). The Save as... function allows to create and save a custom fi le.
The active fi le can always be edited in order to fi t exactly the source speci fi cations.
AutoImage creates automatically the best suited image fi le (custom fi le) for a new source. AutoImage is used
when :
- a new source is detected: AutoImage creates a new custom fi le which can always be edited if necessary.
- the AutoImage is launched via the button on the RCU, the projector’s OSD or from the desktop’s OSD
File notation
The notation of the image fi le happens as follows :
/Standard/SXGA+@60.xml
Type of file : standard or custom
Resolution
Vertical freq
file extension = xml
Image 5-41
5.5.2 Load fi le
When to load a fi le ?
In some cases the user wants a particular fi le to be used for the display of a particular source. In this case the user should load the
desired fi le from the image fi les menu. The load fi le option will allow the user to choose between several fi les corresponding more
or less to the active source speci fi cations.
In normal operation the fi le selection (load) will be done automatically by Auto Image.
How to load a fi le ?
1. Press MENU to activate the Tool bar
2. Press → to select the Image fi les item
3. Press ↓ to Pull down the Image fi les menu
4. Use ↑ or ↓ to select Load
Image 5-42
5. Press ENTER
A dialog box is displayed
R59770718 GALAXY NW SERIES 20/06/2013 71