Barco R9010310, Руководство пользователя

Страница: 37 / 135

4. Connections
4.3 Switching to standby
How to switch to standby?
1. Press Standby to switch the projector to standby.
4.4 Switching off
How to switch off the projector?
1. Press first Standby .
2. Let cool down the projector until the fans stop blowing, at least 15 min.
3. Switch off the projector with the power switch.
4.5 Input Source Connections
4.5.1 Input Facilities
Overview input facilities
OUT IN
On
R
9840450
HD SDI DIGITAL MODULE
OUT IN
On
9840110
SDI DIGITAL INPUT
COMM PORT 10/(100)base-T
RS232/422 OUT RS232/422 IN
IR-Receiver Diagnostic Code
Green Operation
Red Stand-by
IR Sync OK
Hardwired
remote
CTRL 1
Hardwired
remote
CTRL 2
Two way
hardwired
remote
CTRL 3
1
2
3
4
On
On
On
On
DVI INPUT
DVI INPUT DVI OUTPUT
High Bandwidth 5 CABLE INPUT
High Bandwidth 5 CABLE INPUT
R G B H/C V
R G B H/C V
Image 4-3
Input facilities
Input number Type of input
1 Fixed input, 5 cable input or DVI input and DVI output
2 Fixed input, 5 cable input or DVI input
3 & 4 Variable inputs
Two digital inputs available.
•
SDI input ( R9840110 )
• HD SDI Digital input ( R9840450 )
Digital Video Decoder ( R9841170 )
4.5.2 Inputs via RCVDS05
Overview
When using a RCVDS05, the input configuration must be as follows:
R5976801 SLM R9+ 20/10/2004 33