6. Maintenance
6.1
Replacing the SMPS power unit
The SMPS power units are hot swappable. Any operator can replace the SMPS power unit.
Only replace by power units provided by
Barco for the Power Module 19inch! Don’t
use any other power units!
Ne remplacer par des unités d'alimentation
fournis par Barco pour le 19 pouces Power
Module! Ne pas utiliser d'autres unités de
puissance!
The SMPS power units are locked and need to be unlocked prior replacement!
SMPS power supply 800W
SMPS power supply 1200W
Unlock the screw, push the lash to the right,
and then pull out the power unit.
Use a screw driver and press the yellow lock down.
Subsequently open the lock on the left and on the right and pull
out the power unit.
Barco – Green BCM Solution – R591346 – user's manual – Revision 04– November-2016
____________________________________________________________________
42
