Barco PHWU-81B, Руководство пользователя и инструкция по установке

Страница: 89 / 143

9. Advanced features
9. ADVANCED FEATURES
9.1 Password function
About the password function
This projector is equipped with the password function that is designed for prevention of wrong operation by children and restriction
on operation by other than speci
fi ed users. The password function has 3 modes as follows.
DISPLAY INPUT When the projector is turned on, the startup screen (or splash screen) will appear and stay on the screen
until the password is entered. When the password is entered, the startup screen will switch to the regular
operation screen.
MENU ACCESS All the keys except for the POWER key on the projector are disabled. (The keys on the remote control
are enabled.) You can use this mode as a measure of prevention of wrong operation by children and
restriction on operation by other than speci
fi ed users.
SPLASH ID
SCREEN IMAGE CAPTURE and SPLASH SCREEN in the INSTALLATION 2 menu become unavailable. SPLASH
SCREEN will be set to ON automatically.
9.1.1 Enabling the password function
How to enable
1. Display the FEATURE menu.
2. Press the ▲ or ▼ key to select PASSWORD FUNCTION .
3. Press the ◄ or ► key to change the mode among DISPLAY INPUT , MENU ACCESS and SPLASH ID SCREEN .
When the password has already been set, the mode won’t be changed. In such cases, press the ENTER key to cancel the
password function and try again.
4. Press the ENTER key.
The screen for setting the password function will appear.
IMAGE INSTALL1 INSTALL2
MULTI-
SCREEN
FEATURE SIGNAL NETWORK INFO
DISPLAY INPUT
LOCK
UNLOCK
ENTER
ENTER
Image 9-1
5. Press the ENTER key.
The screen for entering a password will appear.
PASSWORD
CONFIRM
1
3
2 4
O K : ENTER
CANCEL : MENU
Image 9-2
6. Enter a 4 - 8 digit password using the ▲ , ► , ▼ and ◄ keys.
( ▲ =1, ► =2, ▼ =3, ◄ =4)
7. Press the ENTER key.
To cancel the procedure, press the MENU key.
8. Enter the password again for con fi rmation using the same steps.
9. Press the ENTER key.
→ If the entered passwords don’t match, an error message will appear.
→ To cancel the procedure, press the MENU key.
R5905597 PHXX SERIES 20/05/2014 85