Barco PHWU-81B, Руководство пользователя и инструкция по установке

Страница: 81 / 143

7. Initial network settings
If the entered password is not correct, CURRENT NETWORK PASSWORD screen appears again.
A
OK
caps
CLEAR
DEL
CANCEL
B C D E F G H I J K L M
N O P Q R S T U V W X Y Z
0 1 2 3 4 5 6 7 8 9
← →
↔
∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗
∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗
CONFIRM NETWORK PASSWORD
NEW NETWORK PASSWORD
Image 7-8
6. Enter the NEW NETWORK PASSWORD and CONFIRM NETWORK PASSWORD .
Password can be set using up to 32 characters including alphabets (capital/small) or numeric characters.
← key: Shifting the position of enter cursor to the left for each character.
→ key: Shifting the position of enter cursor to the right for each character.
↕ key Shifting the position of enter cursor between NEW NETWORK PASSWORD and CONFIRM NETWORK
PASSWORD.
DEL key: Deleting the character in the position of enter cursor for each character.
caps/CAPS key: Switching an alphabet character to CAPITAL or small.
CLEAR key: Deleting all the entered characters.
7. When NEW NETWORK PASSWORD and CONFIRM NETWORK PASSWORD are matched, the setting is completed after chang-
ing the NETWORK PASSWORD.
-
When you select OK and the passwords you entered are matched, the setting change dialog is displayed. After the dialog
disappears, the NETWORK menu is displayed.
- When you select CANCEL, the NETWORK menu is displayed without changing the password.
- If the entered content is not matched, NEW NETWORK PASSWORD screen appears again after an error dialog is displayed.
- The password for the web control software of CRESTRON cannot be changed with this setting.
- It may take some time to re fl ect the settings.
7.4 IP Settings
7.4.1 Start up
How to display
1. Display the NETWORK menu.
2. Press the ▲ or ▼ key to select IP CONFIG .
IP CONFIG ENTER
Image 7-9
3. Press the ENTER key.
IP CONFIG menu appears.
0. 0. 0. 0
0. 0. 0. 0
0. 0. 0. 0
IP CONFIG
DHCP
IP ADDRESS
SUBNET MASK
DEFAULT GATEWAY
MAC ADDRESS
SAVE SETTINGS
ON
OK
Image 7-10
7.4.2 Setting or Clearing DHCP
DHCP
Abbreviation for Dynamic Host Con fi guration Protocol. This protocol automatically assigns IP Address to networked
devices.
R5905597 PHXX SERIES 20/05/2014 77