Barco PHWU-81B, Руководство пользователя и инструкция по установке

Страница: 26 / 143

3. Connections
(d)
(e)
Image 3-2
Rear cover removal
3.2 Power connection
W
ARNING
:
In order to ensure the safety in case of trouble with the projector, use an electrical outlet having
an earth leakage breaker to supply the power to the projector. If you do not have such outlet, ask your dealer
to install it.
About the power cord
• The power cords for use in the U.S., Europe or China are included with this projector. Use the appropriate one for your country.
• This projector uses the power plug of 3-pin grounding type. Do not take away the grounding pin from the power plug. If the
power plug doesn’t
fi t your wall outlet, ask an electrician to change the wall outlet.
• Use 100-240 V AC 50/60 Hz to prevent fi re or electric shock.
• Do not place any objects on the power cord or do not place the projector near heat sources to prevent damage to the power
cord. If the power cord should be damaged, contact your dealer for replacement because it may cause
fi re or electric shock.
• Do not modify or alter the power cord. If the power cord is modi fi ed or altered, it may cause fi re or electric shock.
• The attached power cord is to be used exclusively for this product. Never use it for other products.
• The socket-outlet shall be installed nearby the equipment and shall be easily accessible.
• Use the attached speci fi ed power supply cord. If you use another power supply cord, it may cause interference with radio and
television reception.
How to connect
1. Plug the attached power cord into the power cord inlet of this projector (1).
2
1
E
Image 3-3
Power cord connection
E Earthing (grounding) terminal
2. Plug the other end of the power cord into a power outlet (2)
22 R5905597 PHXX SERIES 20/05/2014