Barco PH series, Руководство пользователя и инструкция по установке

Страница: 95 / 143

9. Advanced features
Important:
In a system using a serial divider, don’t connect the projectors as above.
To monitor and control the projectors collectively or individually, it is necessary to assign GROUP IDs to them.
Setting GROUP IDs
By dividing the projectors into groups, you can monitor and control them collectively by groups. GROUP IDs should be A to Z. You
can create up to 26 groups.
→ The default GROUP ID is A.
1. Display the FEATURE menu.
2. Select GROUP ID by pressing the ▲ or ▼ key.
3. Set the GROUP ID by pressing the ◄ or ► key.
Important:
• When you want to monitor and control the projectors by groups, set a different GROUP ID.
• For details, contact your dealer.
9.6 Control by a control panel, etc.
Overview
When installing the projector in a place where the remote control signals cannot reach the projector, you can control the projector
using a control panel or other device connected to the REMOTE 1 IN terminal.
ON
POWER
COMPUTER1
OFF
ON
BLANK
OFF
R emote control
External contact
control
COMPUTER2
VIDEO S-VIDEO
DVI
A
B
Image 9-8
A
Projector
B Control panel
Controllable functions
• Switching between remote control and external control
• Switching input signals
• Power-on and power-off
• BLANK-on and BLANK-off
Important:
To control the projector using a control panel, set STANDBY MODE in the INSTALLATION 1 menu to STANDARD. When it is LOW,
you cannot control the projector.
Connections
Make sure that the power supplies of the projector and control panel are off.
R5905597 PHXX SERIES 20/05/2014 91
Downloaded From projector-manual.com Barco Manuals