Barco PH series, Руководство пользователя и инструкция по установке

Страница: 80 / 143

7. Initial network settings
7.2 Enabling or disabling the network certi fi cation
About network certi fi cation
You can select whether or not to certify the network communication using the network password.
For details, contact your dealer.
How to enable-disable
1. Display the NETWORK menu.
2. Press the ▲ or ▼ key to select NET WORK CERTIFICATION .
NETWORK
CERTIFICATION
OFF
Image 7-4
3. Press the ENTER key.
Con fi rmation dialog appears.
: NETWORK CERTIFICATION
OK : ENTER CANCEL : MENU
ON NETWORK CERTIFICATION
OK : ENTER CANCEL : MENU
ON
Image 7-5
4. Press the ▲ or ▼ key to select ON or OFF .
5. Press the ENTER key.
→ To cancel the setting, press the MENU key.
→ It may take some time to re fl ect the settings.
7.3 Network Password Settings
How to set
1. Display the NETWORK menu.
2. Press the ▲ or ▼ key to select NETWORK PASSWORD .
NETWORK
PASSWORD
ENTER
Image 7-6
3. Press the ENTER key.
CURRENT NETWORK PASSWORD screen appears.
A
OK
caps
CLEAR
DEL
CANCEL
B C D E F G H I J K L M
N O P Q R S T U V W X Y Z
0 1 2 3 4 5 6 7 8 9
← →
∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗
CURRENT NETWORK PASSWORD
Image 7-7
4. Press the direction keys to move the key cursor, select the characters or marks to enter, and press the ENTER key.
Password can be set using up to 32 characters including alphabets (capital/small) or numeric characters.
← key: Shifting the position of enter cursor to the left for each character.
→ key: Shifting the position of enter cursor to the right for each character.
DEL key: Deleting the character in the position of enter cursor for each character.
caps/CAPS key: Switching an alphabet character to CAPITAL or small.
CLEAR key: Deleting all the entered characters.
→ The default password is “admin”.
5. Select OK , and NEW NETWORK PASSWORD screen appears if the entered password is correct.
76 R5905597 PHXX SERIES 20/05/2014
Downloaded From projector-manual.com Barco Manuals