Barco PH series, Руководство пользователя и инструкция по установке

Страница: 53 / 143

5. Advanced menu
5.8 SIGNAL menu
Overview
0
0
0
0
1024 x 768
60.00 Hz
48.36 KHz
1024
768
1
0
0
0
0
1
IMAGE INSTALL1 INSTALL2
MULTI-
SCREEN FEATURE
SIGNAL NETWORK INFO
100%
COMPUTER INPUT AUTO
OVER SCAN
HOLD
USER
FINE SYNC.
VERT. POSITION
MEMORY CALL
RESOLUTION
(MEMORIZE )
AUTO
HORIZ. POSITION
TRACKING
ENTER
ON
ASPECT NORMAL
SIGNAL MEMORY MEMORIZE
IMAGE INSTALL1 INSTALL2
MULTI-
SCREEN FEATURE
SIGNAL NETWORK INFO
LPF
USER
OFF
SHUTTER(L)
SHUTTER(LS)
SHUTTER(RS)
VERT. SYNC. AUTO
CLAMP WIDTH
SHUTTER(U)
CLAMP POSITION
IMAGE INSTALL1 INSTALL2
MULTI-
SCREEN FEATURE
SIGNAL NETWORK INFO
RESOLUTION (MEMORIZE)
VERTICAL
FREQUENCY
HORIZONTAL
FREQUENCY
HORIZ. PIXELS
VERT. LINES
EXECUTE
CANCEL
OK
OK
Image 5-18
Item Setting Function
MEMORY CALL Use to select the setting of SIGNAL MEMORY already saved.
Impossible to select if no setting has been saved.
AUTO AUTO is selected by default. It optimizes the signal format
automatically depending on the type of video signal supplied from
the computer.
1-xxx - 8-xxx
Use to select the SIGNAL MEMORY already saved. The memory
number relevant to the input signal is displayed. Press the ENTER
key to clear the setting already saved.
SIGNAL MEMORY
MEMORIZE
The settings in the SIGNAL menu can be saved. (See page 48.) Up
to 8 settings can be saved. You can select the memory number. For
example, when you save the signal setting of 720p50 to the memory
1, the memory name is displayed as 1-720p50.
When the settings are already memorized in the selected number,
the settings will be overwritten.
RESOLUTION
(MEMORIZE
)
The current resolution is displayed. To change the current setting,
press the ENTER key to display the RESOLUTION (MEMORIZE)
menu. The new setting can be saved to MEMORY.
VERTICAL FREQUENCY
-
The vertical frequency of the currently projected video signal is
displayed.
HORIZONTAL
FREQUENCY
-
The horizontal frequency of the currently projected video signal is
displayed.
HORIZ. PIXELS 640-1920 The number of horizontal pixels of the currently projected video signal
is displayed. When you change the current setting, select EXECUTE,
and then press the ENTER key, the image is automatically adjusted
according to the resolution you set. The adjustment result can be
saved to MEMORY
VERT. LINES 350-1200 The number of vertical lines of the currently projected video signal is
displayed. When you change the current setting, select EXECUTE,
and then press the ENTER key, the image is automatically adjusted
according to the resolution you set. The adjustment result can be
saved to MEMORY
EXECUTE
OK
Press the ENTER key to start the automatic adjustment. At the
completion of the automatic adjustment, a message is displayed and
you can save the adjustment result to MEMORY.
R5905597 PHXX SERIES 20/05/2014 49
Downloaded From projector-manual.com Barco Manuals