Barco OVERVIEW D 50", Руководство по установке

Страница: 7 / 120

1. Assembly of support frame
OverView D 50" – DOC-3303-5 – installation manual – Revision 10 – September 2006 September 2006 September 2006 September 2006 ________________________________
________________________________ ________________________________ _________________________________________________________ _________________________ _________________________ _________________________1-2
1.1 Contents of support frame carton
Before starting to assemble the support frame check if the material is complete.
Quantity
Quantity Quantity
Quantity Desc
Desc Desc
Description
ription ription
ription
Support Support Support Support
875mm
875mm 875mm 875mm
Support Support Support Support
1000mm
1000mm 1000mm 1000mm
Support Support Support Support
1200mm
1200mm 1200mm 1200mm
2 Front profile ( vertical ) PU I 1, PU I 2 PU 4I 1, PU 41 2 PU 3I 1, PU 31 2
2 Rear profile ( vertical ) PU II 4, PU II 5 PU 4I 4, PU 4I 5 PU 3I 4, PU 3I 5
2 Front profile ( horizontal) PU II 3 PU 2I 12, PU II 3 PU 2I 12, PU II 3
2 Rear profile ( horizontal ) PU II 3 PU II 3 PU II 3
4 Side profile PU I 7
PU I 7 PU I 7
PU I 7 PU I 7
PU I 7 PU I 7
PU I 7 PU I 7
PU I 7 PU I 7
PU I 7
1 Angle with multi socket installed [2]
[2] [2]
[2]
12 Reinforcing angle [1] [1] [1] [1]
1 Box with screws
4 Adjustable foot
4 Profile connector
1 Cable channel
2 safety bracket
Table 1
List of Contents 1 support frame
Figure 1-1
Overview of support frame, labels refer to support 875mm, for other other heights see table!