3. Mechanical setup
Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005
______________________________________________________________
3-18
3.7
Installing the engine
ENG01
Start mounting the projection unit (PU). Place
the support bracket onto the position points of
the 30/60 profile. Then fix the PU on the
profile with three B361320 (DIN912 M6x35).
ENG02
Continue installing the illumination unit (IU)
Make sure that two M6x7 are mounted loosely
onto the 30/30 profile. Place the IU over the
two screws and the two position points on the
30/60 profile. Then shift the IU towards the PU
(position point) and tighten all screws. In this
stage you have to lock the position of the
30/30 profile.
