Barco Njord, Руководство пользователя

Страница: 35 / 72

35 R5913592 / Njord
Local Keypad
The Keypad gives direct access to several functions, in addition to access to the menu system.
The keypad has a backlight that can be switched on and off manually. By default the light turns off after 5
minutes.
The Power button and Shutter buttons are equipped with white, blue and red backlit LEDs. The other keys are
only equipped with white and blue backlit LEDs. The LEDs are controlled according to the features available.
LCD panel
The LCD panel has two main functions:
1. Showing the menus, the adjustment information and also a mirror of the OSD, (On Screen Display)
described in User Interface when this is enabled.
2. Information regarding the status of the projector showing this data:
- Projector status
- Network address
- Active source
- Current firmware version
- Operation Data
- Active functions (Enabled Functions).
Toggle between the two indications by using the Menu button on the keypad, or on the remote control.
The LCD Display will fade out 30 seconds after the last key operation.
4.3 LCD touch panel
LCD touch panel functionality
In addition to the remote control and the keypad, it is also possible to navigate in the menus with the touch
functionality in the LCD panel.
Press the icons to select the functions.
Select switches to toggle.
Select and drag sliders to adjust slider value.
When using the touch screen, some menu pictures will be present different compared to using the remote
control or keypad. This applies in those cases where there is a numerical value to be set. The illustrations
below shows how to scroll and confirm a numeric value. In this case, setting the screen size.
Image 4 – 3
Input & Communication