Barco Njord, Руководство по установке, Страница: 54 / 232

R5913593 /01 Njord 54
4.10 Wall or ceiling mount without rigging frame
General
In case of installing the projector to other positions than desktop or ceiling, it is preferred to use the rigging
frame designed for this purpose. In cases where this is not possible, suitable 3rd part brackets for safe
installation must be used to secure the unit from damage or causing injury. .
Attachment points.
The attachment points for additional rigging equipment are the same as for the adjustable feet at the bottom,
and also the corresponding points at the top of the projector.
Attachment point specifications
Attachment point screw dimension M10, max 30mm deep
Tightening torque 20 Nm
Max load per attachment point 60 kg
Projectors attachment points
Image 4 – 16 Attachment points bottom. Image 4 – 17 Attachment points top.
Installation procedures