Barco Nio MDNC-3521 SNES, Руководство пользователя

Страница: 17 / 66

17 R5915130 /05 Nio 2MP / 3MP LED Display
During normal operation, double-press the jog dial to switch KVM inputs more quickly. A first click
will make the shortcut bar pop up, a second click will switch inputs (since the KVM switch icon is
selected by default when the KVM switch is enabled).
When switching KVM inputs, the video is switched instantly while switching the USB signal might
take a little longer (up to 2 seconds).
2.4 QAWeb Enterprise registration
About
QAWeb Enterprise helps you manage quality and assure compliance of your expanding healthcare
enterprise with less effort, lower cost, and complete confidence. This fully automated and secure system
supports a consistent image quality and uptime for all registered imaging display systems within your facility
and across your enterprise. Learn more at
www.barco.com/qaweb .
To register your display system to your QAWeb Enterprise organization, the QAWeb Enterprise Agent must be
installed and running on your workstation and it must be able to communicate with the QAWeb Enterprise
cloud service.
For more information and installation instructions, please check the QAWeb Enterprise user guide on www.
barco.com/support .
2.5 VESA-mount installation
CAUTION: Use suitable mounting apparatus to avoid risk of injury.
WARNING: Never move a display attached to an arm by pulling or pushing the display itself.
Instead, make sure that the arm is equipped with a VESA compliant handle and use this to move the
display.
Please refer to the instruction manual of the arm for more information and instructions.
WARNING: Use a mount that is compliant with the VESA 100 mm standard.
Use a mount that can support the weight of the display. Refer to the technical specifications of this
display for the applicable weight.
Overview
The panel, standard attached to a stand, is compatible with the VESA 100 mm standard. Thus, it can be used
with a mount that is compliant to the VESA 100 mm standard. This chapter shows you how to release the
panel from the stand and how to attach it to a VESA mount. If you’re not using a mount, you can skip this
chapter.
1. Unlock the stand locking mechanism and put the display in the highest position.
Installation and setup