Barco Nio MDNC-3521 SNES, Руководство пользователя

Страница: 12 / 66

R5915130 /05 Nio 2MP / 3MP LED Display 12
2.1 Stand base plate mounting
To mount the stand base plate
1. Put the display face down on a clean and soft surface. Be careful not to damage the panel.
Tip: The stand base plate can also be mounted while the display is still safely positioned in the
bottom buffer of box. See “Repackaging instructions”, page 40 for more information.
2. Attach the stand base plate to the pillar by fixing the dedicated screw as shown below.
Image 2–1
2.2 Single workstation setup
About
In this setup, the display is connected to a single workstation with a DisplayPort cable. When connecting a
USB cable from your display to the workstation, you can control the workstation with a keyboard and mouse
connected to the display.
USB
DisplayPort
USB
Image 2–2
Installation and setup