Barco Nio 5.8MP Gray, Руководство пользователя

Страница: 32 / 58

K5902142 /07 Nio 5.8MP Gray 32
4. Set Error Threshold as desired and confirm.
4.17 Display orientation
About Display orientation
Your display automatically detects its physical orientation (portrait or landscape) and, by default, automatically
adjusts the image orientation to this. This means that when your display is physically rotated, the image will
rotate along.
The OSD menu however, allows to overrule this behavior and force the image orientation to portrait or
landscape regardless of the physical orientation of the display. This may be especially useful when operating
your display with the screen facing upwards.
To set the Display orientation
1. Bring up the OSD main menu.
2. Navigate to the Configuration > Image Sources menu.
3. Enter the Display Orientation submenu.
4. Select Landscape/Portrait/Automatic as desired and confirm.
4.18 Image scaling
About image scaling
Enabling image scaling will copy each individual pixel to one or more adjacent pixels so that the size of the
displayed image will be a multiple of the original image source video input signal.
Image scaling is only possible when the resolution of your display’s video input signal is less than or
equal to half the maximum resolution of the display.
To enable/disable image scaling:
1. Bring up the OSD main menu.
2. Navigate to the Configuration > Image Source menu.
3. Enter the Scaling submenu.
4. Select Enabled/Disabled as desired and confirm.
4.19 Image source selection
About image source selection
The Nio 5.8MP Gray has 4 video inputs: DisplayPort 1, DVI 1, DisplayPort 2 and DVI 2. The input to be
displayed is dependent on the selected
image source selection mode :
• Automatic image source selection mode automatically detects the connected video input and shows it on
the screen. If more than one video input is connected, the input to be displayed will be determined based
on the following priority mechanism:
1. DisplayPort 1 (highest priority)
2. DVI 1
3. DisplayPort 2
4. DVI 2 (lowest priority)
• Manual image source selection mode allows to manually select the input to be displayed.
• Expert image source selection mode enables the dual input channel mechanism . This will make inputs
1 (DisplayPort 1 together with DVI 1) and inputs 2 (DisplayPort 2 together with DVI 2) to be handled as two
Advanced operation