Barco Nio 5.8MP Gray, Руководство пользователя

Страница: 26 / 58

K5902142 /07 Nio 5.8MP Gray 26
4.7 Hibernate
About hibernate
When hibernate is enabled, not only the backlight, but also other functions will be disabled to reduce power
consumption to a minimum. This happens after an adjustable period of time.
DPMS mode must be enabled before hibernate can be enabled. See “DPMS mode”, page 25 .
Connect your keyboard, mouse, touchpad, etc. directly with your workstation (and not with the
display) to be able to awake your workstation and display from hibernate.
To enable/disable hibernate
1. Bring up the OSD main menu.
2. Navigate to the Configuration > Power Management menu.
3. Enter the Hibernate submenu.
4. Select Enabled/Disabled as desired and confirm.
To adjust the hibernate time-out
1. Bring up the OSD main menu.
2. Navigate to the Configuration > Power Management menu.
3. Enter the Hibernate Timeout submenu.
4. Set the time-out value as desired and confirm.
4.8 Dry mode
About Dry mode
Dry mode prevents condensation from forming in the display.
• In DPMS mode, the backlight remains powered at a minimum level to maintain some heat in the panel.
• When returning from DPMS mode, standby mode or off state, the display fans spin fast for 1 hour to
increase airflow in and around the display. After 1 hour, the fan speed returns to normal regime.
Dry mode remains enabled until manually disabled.
To enable/disable Dry mode on your display:
1. Bring up the OSD main menu.
2. Navigate to the Configuration > Power Management menu.
3. Enter the Dry Mode submenu.
4. Select Enabled/Disabled as desired and confirm.
Advanced operation