Barco Nio 2MP LED, Руководство пользователя

Страница: 30 / 54

K5903058 /11 Nio 2MP LED Display 30
5.1 Scheduled maintenance
About
The Nio 2MP LED Display does not require any scheduled maintenance or calibration activities. We
recommend to use QAWeb with the Barco default tests and frequencies to calibrate and maintain the display,
or to return the display to a Barco approved maintenance organization. In any case of doubts, please contact
Barco Healthcare.
5.2 Cleaning instructions
To clean the display
Apply a cleaning/disinfecting product to a soft lint-free cloth, such as a microfiber or gauze and rub the display
surface thoroughly. In order to be effective, all surfaces must be cleaned for a certain amount of time (ranging
from 30 seconds to 2 minutes).
Use a cleaning/disinfecting product that is alcohol-, alkali-, water- or chlorine-based. Common examples are:
• Isopropanol 100%
• Ethanol 70%
• 0.5% Chlorehexidine in 70% ethanol/isopropanol
• Ortho-Phthalaldehyde (OPA) 0.55%
• Haemo-sol, 1% in water
• 250 ppm Chlorine solution
• 1.0% lodine in 70% ethanol
• 1.6% aqueous ammonia
• “ Green soap ” (USP)
• 0.5% Chlorehexidine in 70% isopropyl alcohol
• Products similar to optical cleaning liquid
• Bacillol AF
• Flux
• Sodium hypochlorite 10%
When selecting an alternative cleaning/disinfecting product, it is recommended to always identify the active
ingredients. In case of doubt about a certain cleaning product, use plain water.
Do not use any of the following products:
• Alcohol in concentrations > 70%
• Strong alkalis lye, strong solvents
• Acetone
• Toluene
• Acids
• Detergents containing fluoride
• Detergents containing ammonia
• Detergents containing abrasives
• Steel wool
• Sponge with abrasives
• Steel blades
• Cloths with steel thread
• Paper-based cloths (e.g. paper towels, facial tissues, toilet paper)
CAUTION: Read and follow all instructions on the label of the cleaning product.
CAUTION: Take care not to damage or scratch the front glass or LCD. Be careful with rings or other
jewelry and do not apply excessive pressure on the front glass or LCD.
Maintenance