Barco Nio 2MP LED, Руководство пользователя

Страница: 22 / 54

K5903058 /11 Nio 2MP LED Display 22
4.1 OSD menu language
About the OSD menu language
By default, the OSD menu comes up in English. However, there ’ s a wide range of other languages available
for the OSD menu of your Nio 2MP LED Display.
To change the language of the OSD menu:
1. Bring up the OSD main menu.
2. Navigate to the
Configuration > User Interface > Menu menu.
3. Enter the Language submenu.
4. Select one of the available languages and confirm.
4.2 OSD menu automatic close function
About the OSD menu automatic close function
By default, the OSD menu will disappear automatically after approximately 90 seconds of inactivity. However,
this function can be disabled so that the OSD menu remains on the screen until manually closed.
To enable/disable the OSD menu automatic close function:
1. Bring up the OSD main menu.
2. Navigate to the
Configuration > User Interface > Menu menu.
3. Enter the Automatic Close submenu.
4. Select Enabled/Disabled as desired and confirm.
4.3 Power status LED
About the power status LED
By default, when the display is switched on, the power status LED is dimmed. This behavior can be changed
so that the power status LED will be
green when the display is switched on.
When the display is in stand-by mode, the power status LED will always turn orange, even when the
power status LED is disabled.
To enable/disable the power status LED:
1. Bring up the OSD main menu.
2. Navigate to the
Configuration > User Interface > Indicator Lights menu.
3. Enter the Power Status submenu.
4. Select Enabled/Disabled as desired and confirm.
4.4 Key indicator lights
About the key indicator lights
By default, after lighting up, the key indicator lights will dim again if no further actions are taken within the
following 5 seconds. However, this behavior can be changed so that the key indicator lights are always on or
always off.
To configure the key indicator lights
1. Bring up the OSD main menu.
2. Navigate to the
Configuration > User Interface > Indicator Lights menu.
3. Enter the Keys submenu.
Advanced operation