![background image](http://html1.mh-extra.com/html/barco/ngs-d320-lite/ngs-d320-lite_user-manual_3883334041.webp)
4. Operation
- Standby
- EDID preferred timing
- One of the speci
fi
c timings (listed in the drop down box)
Image 4-23
Decoder settings DVI Out / DP Out/ HDMI Out
2. The
Content
fi
eld is set to loop through by default.
The drop down box will list any available video stream on the network.
For each interface type, select a stream from another NGS-D320, to allow playback on the output port
of the decoder. It is also possible to disable decoding..
Note that decoding will be active depending on available resources. Refer to "Resources", page 9 for
more information.
3. When a stream is selected, the
Custom url
fi
eld
will automatically be
fi
lled in.
It is also possible to manually type a url into the Custom url
fi
eld to connect to an audio stream.
4. Press
Apply
to save settings.
4.5.4.4 HDMI Audio Out
HDMI Audio Out
1. The
Content
fi
eld is set to loop through by default.
Image 4-24
Decoder settings HDMI Audio Out
The drop down box will list any available audio stream on the network. Select a stream from another
NGS-D320 to allow playback on the decoder.
The audio decoding can also be disabled.
2. When a stream is selected, the
Custom url
fi
eld will automatically be
fi
lled in.
It is also possible to manually enter a url into the Custom url
fi
eld to connect to an audio stream.
3. Press
Apply
to save settings.
K5903129 NGS-D320 29/09/2016
39