![background image](http://html1.mh-extra.com/html/barco/ngs-d320-lite/ngs-d320-lite_user-manual_3883334040.webp)
4. Operation
4.5.4
Decoder settings
4.5.4.1 Overview
Decoder settings tab
1. Select the tab
Decoder Settings
Image 4-21
Settings _ Decoder Settings
The
Decoder Settings
page allows to set up the device for decoding & streaming media.
2. Press the
Refresh
button to ensure you have the latest device status displayed correctly before mak-
ing any changes.
All available output connectors on the device will always be listed, even if no active connection is
present. Con
fi
guration changes can be made at any time, they will be applied when the connection is
live. This allows to pre-con
fi
gure the device in advance.
4.5.4.2 Audio
Headphone / Line Out
1. Select
Headphone
or
Line Out
to be con
fi
gured for streaming.
Image 4-22
Decoder settings Audio out
2. The
Volume
is by default set to 100%. Change the slider to adjust the volume.
3. The
Content
fi
eld is set to loop through by default.
The drop down box will list any available audio stream on the network. Select a stream from another
NGS-D320 to allow playback on the decoder.
The audio decoding can also be disabled.
4. When a stream is selected, the
Custom url
fi
eld will automatically be
fi
lled in.
It is also possible to manually enter a url into the Custom url
fi
eld to connect to an audio stream.
5. Press
Apply
to save settings.
4.5.4.3 DVI Out/DP Out/HDMI Out
Output Timing
1. Select the Output Timing in the drop down box:
38
K5903129 NGS-D320 29/09/2016