![background image](http://html1.mh-extra.com/html/barco/ngs-d320-lite/ngs-d320-lite_user-manual_3883334038.webp)
4. Operation
2. The
Gain
is by default set to 50%. Move the slider to adjust the gain.
3. The audio
Encoding pro
fi
le
is by default set to “Uncompressed L-16”. No other pro
fi
les are available.
To disable the audio encoding: Select (disabled) in the encoding pro
fi
le drop down list.
4. De
fi
ne the destination/port in the
Destination
fi
eld:
- Multicast: enter the valid multicast address/port
- Unicast: leave the destination
fi
eld empty
5. De
fi
ne the Time to Live under
ttl
. This is by default set to 5.
6. The
RTSP
url can be copied from the rtsp link. Right click
rtsp
and save as. This url can be used to
connect an RTSP client to the NGS-D320.
7. Press
Apply
to save settings.
4.5.3.3 DVI In/DP In/HDMI In
Input EDID
1. By default, the Input EDID is set to “Default EDID”
Choose the desired Input EDID setting in the
Input EDID
drop down box. Select the default setting or
one of the speci
fi
c timings.
Image 4-18
Encoder settings DVI In / DP In / HDMI In
On NGS-D320 Lite devices, only Stream 0 can be con
fi
gured
On NGS-D320 Pro devices, Stream 0 & 1 can be con
fi
gured independently.
2. The
Encoding pro
fi
le
is by default set to “auto”. Select the desired Encoding pro
fi
le.
To disable Encoding explicitly for an input: Select (disabled) in the encoding pro
fi
le drop down list.
3. De
fi
ne the destination/port in the
Destination
fi
eld.
- Multicast: valid multicast address/port
- Unicast: leave the destination
fi
eld empty
4. De
fi
ne the Time to Live under
ttl
. This is by default set to 5.
5. The
RTSP
url can be copied from the rtsp link. Right click
rtsp
and save as. This url can used to
connect an RTSP client to the NGS-D320.
36
K5903129 NGS-D320 29/09/2016