![background image](http://html1.mh-extra.com/html/barco/ngs-d320-lite/ngs-d320-lite_user-manual_3883334024.webp)
4. Operation
Main Menu
Submenu
Description
Network settings Network con
fi
guration
Encoder settings Con
fi
gure & use as encoder
Decoder settings Con
fi
gure & use as decoder
Settings
Power settings
Con
fi
gure DPMS settings
Discovery
Discover all NGS-D320 devices in the network
If you change a setting, the Apply button appears
, press this button to con-
fi
rm the change. If you leave the page with unsaved changes, a warning message will
appear.
If you refresh your browser (eg. via F5 on Windows machines), then you will be taken
back to the login screen. This is due to the nature of how the webUI is designed. There-
fore you will note that certain pages contain a Refresh button, which only refresh the
actual page being displayed.
4.2.4
Login
Introduction
Open your browser, and navigate to the device by entering the IP address of the device.
Image 4-2
Login
To
fi
nd the IP address of the device, see chapter "4. Operation", "Discovery", page 23.
Browse to the device’s website, e.g.:
https://192.168.0.100
The security warning appears because the device has no DNS hostname, but hosts an
https website (using a self-signed certi
fi
cate). Browsers will show this as insecure be-
cause they have no proof of the identity of the device (in contradiction with true secure
sites, that do prove their identity through an externally signed certi
fi
cate). The interac-
tion through this website however is secure (it can not be listened in).
First login
Upon
fi
rst login, an administrator password MUST be set for the device.
22
K5903129 NGS-D320 29/09/2016