Barco MXRT-1450, Руководство пользователя, Страница: 32 / 53

5. Driver and software features
5.9.3 Con fi guration
Con fi guring Reading Environment
• Hotkey: Click Clear to remove a hotkey. Click on the hotkey box to enter a new one.
• Copy captured image to Windows clipboard: Check this box to copy the image of the display with
the cursor to the clipboard.
• Output directory: To save the capture images as fi les, enter a target location here.
• File format: Use these radio buttons to choose the fi le format as either PNG or PPM.
5.10 SingleView
5.10.1 Description
Overview
SingleView enables the use of a Coronis Fusion display as a single display in the Windows desktop and
eliminates any tearing down the center. SingleView is enabled by default on Coronis Fusion displays.
Image 5-11
Supported displays
When driven by an MXRT-x400 or later display controller, SingleView is supported on all Coronis Fusion
displays.
5.10.2 Operation
Using SingleView
A button will switch all Coronis Fusion displays into SingleView , and another will switch all into DualView .
Hotkeys are available for both actions.
When in SingleView , it is possible to have the left and right halves out of position, and a button will swap
the two.
5.10.3 Con fi guration
Con fi guring SingleView
• Activate SingleView mode now: Changes all Coronis Fusion displays into SingleView mode.
• Swap Left/Right: This can correct misaligned SingleView displays one at a time.
• Activate DualView mode now: Changes all Coronis Fusion displays into SingleView mode.
• Hotkeys: SingleView and DualView activations have individual hotkeys. Click Clear to remove a
hotkey. Click on the hotkey box to enter a new one.
30 K5905271 DISPLAY CONTROLLER 27/02/2017