Barco MiSPHERE, Руководство по установке

Страница: 42 / 59

7. Cabling of MiSPHERE control boxes
7.1 Power cabling of MiSPHERE control boxes
Power boxes
Barco provides several types of power boxes. Depending on the size of the MiSPHERE system you can choose to use the mono
phase power box or the custom made power box or the rental power box. The type of power box, does not influence the power
cabling of the MiSPHERE system. See installation manual of the concerned power box for installation instructions.
Necessary parts
• Power box(es) with matching cables.
• Waterproof power linking cables.
• Dummy power plugs
How to realize the power cabling of MiSPHERE control boxes ?
1. Connect a power source cable, coming from the power box, with the power input socket of one of the control boxes.
2. Connect now the power output socket of this control box with the power input socket of the next control box. Use for that a
waterproof power linking cable.
3. Connect the power output socket of the second control box with the power input socket of the third (last) control box. Use for that
a waterproof power linking cable.
4. Place a dummy power plug upon the power output socket of the last control box within the power branch.
5. Make sure that all plug holder clamps are locked firmly.
6. Repeat from step one until all control boxes are provided with power.
Example of power cabling
POWER
DATA
OUT
IN
POWER
DATA
OUT
IN
POWER
DATA
OUT
IN
POWER
DATA
OUT
IN
POWER
DATA
OUT
IN
POWER
DATA
OUT
IN
POWER
DATA
OUT
IN
B C
A
Image 7-2
A Power source cable.
B Power linking cable.
C Dummy power plug.
38 R5976941 MISPHERE 03/01/2006