background image

Preface

7

Environmental information

Disposal Information

The lamps inside the display contain mercury. Do not throw the display 
in the trash. Dispose of it as required by local ordinances or regulations.

This equipment has required the extraction and use of natural resources 
for its production. It may contain hazardous substances for health and 
environment.

In order to avoid the dissemination of those substances in the 
environment and to diminish the pressure on natural resources, we 
encourage you to use the appropriate take-back systems.

Those systems will reuse or recycle most of the materials of your end-
of-life equipment in a sound way.

The crossed-out wheeled bin symbol invites you to use those 
systems.

If you need more information on the collection, reuse and 

recycling systems, please contact your local or regional waste 
administrator.

You can also contact us for more information on the environmental 
performances of our products.

Safety Instructions

General Recommendations

Read the safety and operating instructions before operating the display. 

Retain safety and operating instructions for future reference. 

Adhere to all warnings on the display and in the operating instructions 
manual. 

Follow all instructions for operation and use. 

Содержание MFCD 1219 (TS





































Отзывы: