Barco MES ACURAS HEAD, Руководство пользователя и инструкция по установке

Страница: 83 / 131

8. Getting started
A Status Information dialog will appear, click OK to save this position or to modi fi ed selected position.
Image 8-78
Position center top saved successfully
12.Repeat steps 5 to 11 to create additional positions until all remaining channel corners are part of at least one position.
Image 8-79
Position top back saved successfully
8.5.3.2 De fi ning Auto Geometry position: HUD
HUD
Head Up Display
Introduction
In case of AutoGeometry position subtype: HUD, the four corners of the region of interest of the HUD image need to be measured.
These corners can appear on one single channel or on multiple channels. This requires the user to identify the corners of the HUD
in relation to the background channels on which they are projected.
1 2
a b
c d
Image 8-80
Example: HUD corners in multiple channel setup
1 channel 1
2 channel 2
a, b, c, d HUD corners
How to de fi ne the Auto Geometry position for HUD image?
1. Project any image or pattern from the projectors for the desired AutoGeometry position subtype: HUD
Note: The projectors include the HUD projector and projectors on whose projected image the HUD image corners are appear-
ing.
2. On the Positioning Page, navigate to Position > Position type and select AutoGeometry from the drop down list.
R59770509 MES ACURAS HEAD - AUTO ALIGNMENT HEAD 24/11/2010 75