Barco MES ACURAS HEAD, Руководство пользователя и инструкция по установке

Страница: 62 / 131

8. Getting started
Note: If you have selected an existing position and click the Test button, the selected existing position is shown as a square
on the image and the laser beam will point at it.
This can be used to check if the position is inside the Panel Marker.
4. Select the correct Auto Alignment Head location from the Head Location drop down list.
Image 8-36
Selecting the correct Head Location
Note: If different Auto Alignment Head location is selected, then you will be prompted again to physically position the Auto
Alignment Head at the location as indicated in the drop down list.
5. From the Select Projectors that makeup this Position section, select a projector for which Acuras Multi-point position has to be
de fi ned.
54 R59770509 MES ACURAS HEAD - AUTO ALIGNMENT HEAD 24/11/2010