Barco MDSC-8532, Руководство пользователя

Страница: 31 / 64

31 R5914105 /01 MDSC-8532
To select the main source
1. Bring up the OSD main menu.
2. Navigate to the
Input Select menu.
3. Enter the Main Source submenu.
4. Select one of the available main sources and confirm.
4.3.2 4K SDI mode (12GP version only)
About 4K SDI mode
The available 4K SDI modes for your display are:
• Square-division (SQD) (*)
• 2-sample interleave (2SI)
(*) Available only with Quad-SDI.
To select the 4K SDI mode
1. Bring up the OSD main menu.
2. Navigate to the
Input Select menu.
3. Enter the 4K SDI mode submenu.
4. Select one of the available 4K SDI modes and confirm.
4.3.3 SDI config (12GP version only)
About SDI config
The available SDI config modes for your display are:
• Quad-SDI (Quad link 3G-SDI)
• 12G SDI-1
• 12G SDI-2
To select the SDI config mode
1. Bring up the OSD main menu.
2. Navigate to the
Input Select menu.
3. Enter the SDI config submenu.
4. Select one of the available SDI config modes and confirm.
4.3.4 DisplayPort mode
About DisplayPort mode
The available DisplayPort (DP) modes for your display are:
• DP 1.2 SST
• DP 1.2 MST L:R: MST stream 1 on Left side/ MST stream 2 on Right side
• DP 1.2 MST R:L: MST stream 1 on Right side/ MST stream 2 on Left side
Please refer to the technical specifications for an overview of accepted video formats.
To select the DisplayPort mode
1. Bring up the OSD main menu.
2. Navigate to the
Input Select menu.
3. Enter the DP mode submenu.
4. Select one of the available DisplayPort modes and confirm.
Advanced operation