Barco MDSC-8527 Скачать руководство пользователя страница 15

Страница: 15 / 64

R5914634 /01 MDSC-8527

5. Connect the USB2.0 type B interface to a USB memory stick for in-field firmware updates. For more

information, please refer to qualified service personnel.

Image 2–2

DisplayPort VESA DP 1.2 certified cables for 5.4 Gbps HBR2 with a length of up to 3 m are
recommended.

Premium certified HDMI 2.0 cables with a length of up to 3 m are recommended.

Use 3G-SDI Belden 1694A cables with a length of up to 50 m.

The video output must be enabled in the OSD menu (see

“Video out”, page 38

A subset of the commands of the remote control protocol is also available on a new DDC protocol
on DVI and DisplayPort1 auxiliary channel.

2.2.2 MDSC-8527 12GP version

To connect the interfaces

1. Connect one or more video source(s) to the corresponding video inputs of the display. For a list of

supported video inputs, see

“Technical specifications”, page 56

2. SDI input loop-through: When the SDI video input is connected, an additional SDI video sink can be

connected to the SDI output.

3. Video output: The entire active image on the screen (including OSD) can be duplicated to a FHD (1080p/

1080i) signal on the DisplayPort output connector, to which an additional DisplayPort video sink can be
connected.

4. Connect the USB2.0 type B interface with a workstation to use the remote control protocol.
5. Connect the USB2.0 type B interface to a USB memory stick for in-field firmware updates. For more

information, please refer to qualified service personnel.

6. 4 BNC connectors available for Quad-link SDI or 2x 12G-SDI In and 2x 12G-SDI Out.

Display installation

Содержание MDSC-8527

































































Результаты поиска

Содержание MDSC-8527

Отзывы:

Похожие инструкции для MDSC-8527

Бренды по названию

Популярные бренды

Barco MDSC-8527, Руководство пользователя

Результаты поиска

Содержание MDSC-8527

Отзывы:

Похожие инструкции для MDSC-8527

Бренды по названию

Популярные бренды