Barco MDSC-8358 Series, Руководство пользователя

Страница: 12 / 56

K5902150 (451920612554) /03 MDSC-8358
12
10. DVI splitter input connector
(*) 4 DVI connectors, numbered from 1 to 4 from right to left; all connectors must be installed when in SL
mode; DVIs 1 & 3 or 2 & 4 must be installed when in DL mode.
The 5V connections are available with the specific purpose to power an external DVI extender.
No other uses of the +5V are allowed.
Every +5Vout connector is connected with the nearest jack, but every pair is independent (500mA
max).
If a DVI pair is disabled, then there is no power on the connector and the jack, connected to the DVI
connector.
2.4 Connector pin assignments
2.4.1 DVI – D single link / dual link connector
Overview
Image 2-4
Pin Function
1 D2_Rx- (T.M.D.S.)
2 D2_Rx+ (T.M.D.S.)
3 GND (data 2 shield)
4 D4_RX- (T.M.D.S.)
5 D4_RX+ (T.M.D.S.)
6 SCL (for DDC)
7 SDA (for DDC)
8 N.C.
9 D1_Rx- (T.M.D.S.)
10 D1_Rx+ (T.M.D.S.)
11 GND (data 1 shield)
12 D3_RX- (T.M.D.S.)
13 D3_RX+ (T.M.D.S)
14 +5V input (form the video source system)
15 GND
16 +5V Power for DVI extenders
17 D0_Rx- (T.M.D.S.)
18 D0_Rx+ (T.M.D.S.)
19 GND (data 0 shield)
20 D5_RX- (T.M.D.S.)
21 D5_RX+ (T.M.D.S.)
22 GND (clock shield)
23 CK_Rx+ (T.M.D.S.)
24 CK_Rx- (T.M.D.S.)
Parts, controls and connectors