Barco MDSC-2324 DDI, Руководство пользователя

Страница: 28 / 78

K5903252 (451920612633) /02 MDSC-2324
28
Protective earth
Earth the MDSC-2324 by connecting the protective earth pin to a grounded outlet by means of a yellow/green
AWG18 wire (maximum admitted cable length according to national regulation requirements).
Image 3-10
CAUTION: The display must be earthed.
Potential equalization
When potential equalization between the display and other devices is required then connect the potential
equalization pin (POAG: DIN42801) to the potential equalization terminal of the equipment.
Image 3-11
3.7 Cable routing
To route the cables
1. For displays mounted to a VESA arm with internal cable routing provisions, route all cables through the cable
routing channel, then reinstall the connector compartment cover.
8a
Image 3-12
or
For all other mounting options, remove the cable routing channel expansion clip from the connector
compartment cover and route all cables through it while reinstalling the cover.
Display installation