Barco MDSC-2242, Руководство пользователя, Страница: 21 / 64

K5903030 (451920611336) /05 MDSC-2242
21
About video input connections
The MDSC-2242 can have multiple different video inputs connected (depending on the display version).
Switching between the different inputs can be easily done by pressing the direct access key for this. See the
dedicated section for more info.
Futhermore, if more than one video source is connected, the Picture in Picture (PiP) and Side-by-Side (SbS)
functionality becomes available, allowing you to view two different video inputs at once. Please refer to the
dedicated chapter for more info on how to activate and use the PiP and SbS features on your MDSC-2242.
This chapter describes how to connect the different video input types for each version of the MDSC-2242.
3.2.1 MDSC-2242 LED version
To connect the video inputs
1. Connect one or more of the available video source(s) to the corresponding video inputs using the appropriate
video cable(s).
1
2 3
4 5 6 7 8 9
Image 3-2
DVI or VGA (*) 4
DisplayPort 5
SDI 1
R/G/B/S 6/7/8/2
R/G/B (SOG) 6/7/8
Y/Pb/Pr 7/8/6
CVBS 3
S-Video 9
(*) PC analog (VGA) input source can be connected to the DVI-I input connector using a DVI-I to VGA adapter.
The use of an adapter cable of at least 0.15 m long will allow an easy placement inside the cable cover.
3.2.2 MDSC-2242 MNA version
To connect the video inputs
1. Connect one or more of the available video source(s) to the corresponding video inputs using the appropriate
video cable(s).
Display installation