Barco MDRC-2122 WP, Руководство пользователя

Страница: 11 / 41

3. Display installation
4. Connect the supplied external DC ( ) power supply to the +12 VDC power input of your display.
5. Plug the other end of the external DC ( ) power supply into a grounded power outlet by means of
the proper power cord delivered with your display.
1 1 4
5
2 3 1
Image 3-4
3.5 Re-attaching the cover
To re-attach the connector compartment cover
Put the cover back in position by sliding it downwards so that it is fi xed to the display again.
Pay attention that all cables stay in the cable channel while re-attaching the cover.
Image 3-5
3.6 Routing the cables
To route the cables
1. Slide the cable routing strap through the opening in the back of the stand.
2. Bundle all cables together so that they will fi t in the strap.
K5903049 EONIS 25/06/2015 9