Barco MDPC-8127, Руководство пользователя, Страница: 23 / 52

23 R5913216 /03 MDPC-8127
To switch off your display
1. Push or turn the jog dial during normal operation.
2. Turn the jog dial to select the standby icon ( ), then push to confirm.
3. Push the jog dial again to power off the display.
3.3 OSD menu use
About the OSD menu
The OSD menu allows you to configure your MDPC-8127 so that it will fit your needs in many possible working
environments. You can also find information about the current status and settings in the OSD menu.
To open the OSD menu
1. Push or turn the jog dial during normal operation.
2. Turn the jog dial to select the main menu icon.
3. Push the jog dial again to confirm the selection.
As a result, the OSD main menu comes up. If no further actions are taken within the next 90 seconds, the
OSD menu will disappear again.
The OSD menu auto-exit function can be disabled in the OSD menu. Please refer to “ OSD menu
automatic close function ” , page 26 for detailed instructions on how to do this.
To navigate through the OSD menus
• Turn the jog dial left or right to scroll through the (sub)menus, to change values or to make selections.
• Push the jog dial to go into a submenu or confirm adjustments and selections.
• Push and hold the jog dial for approximately 3 seconds to cancel adjustments or exit a (sub)menu.
• Continue to hold the jog dial to exit all OSD menus.
Daily operation