Barco MDNG-3220, Руководство пользователя

Страница: 16 / 47

3. Display installation
1. Put the display in the lowest position and fasten the height mechanism, see "Unlocking the height
mechanism", page 9 .
2. Put the display face down on a clean and soft surface. Be careful not to damage the panel screen.
3. Remove the plastic cover with a
fl athead screw driver.
4. Slide the plastic cover over the neck of the foot.
5. Remove the four screws fi xing the foot while supporting the foot.
6. Attach the arm stand fi rmly to the panel using 4 screws M4 x 8 mm.
3.7 First time starting up
Overview
You are now ready to start up your NIO 3MP LED Display for the fi rst time.
14 K5903503 NIO 3MP LED DISPLAY 15/10/2014