Barco MDFC-8232 3SW, Руководство пользователя

Страница: 38 / 70

R5913170 /00 MDFC-8232 38
The available primary and secondary inputs depend on the display version (see “ Main source ” ,
page 34).
To select Picture in Picture input
1. Bring up the OSD main menu.
2. Navigate to the
Input Select menu.
3. Enter the PiP Input submenu.
4. Select one of the available PiP inputs (or NONE) and confirm.
5.3.7 Picture in Picture mode
About Picture in Picture mode
The available Picture in Picture modes for your display are:
• Large PiP: 35% of display horizontal size in top or bottom of right corners
• Small PiP: 25% of display horizontal size in top or bottom of right corners
To select Picture in Picture mode
1. Bring up the OSD main menu.
2. Navigate to the
Input Select menu.
3. Enter the Picture in Picture Mode submenu.
4. Select one of the available Picture in Picture modes and confirm.
5.3.8 Picture in Picture position
About Picture in Picture position
The available Picture in Picture positions for your display are:
• Bottom right
• Top right
To select Picture in Picture position
1. Bring up the OSD main menu.
2. Navigate to the
Input Select menu.
3. Enter the PiP Position submenu.
4. Select one of the available PiP positions and confirm.
5.3.9 Picture in Picture transparency
About Picture in Picture transparency
The available Picture in Picture transparencies range selectable for your display is between:
• 0: No transparency
• 10: Maximum transparency (roughly 37%)
To select Picture in Picture mode
1. Bring up the OSD main menu.
2. Navigate to the
Input Select menu.
3. Enter the PiP transparency submenu.
4. Select one of the required PiP transparency value and confirm.
Advanced operation