Barco MDCG-5221, Руководство пользователя

Страница: 29 / 52

5. Advanced operation
5.17.2 DICOM status report
About DICOM status report
Following information is available:
Compliance status Shows if the current DICOM curve
is compliant or not.
Maximum error Shows the maximum error of the
current DICOM curve. This is the
deviation compared to a perfect
DICOM.
Error threshold Shows the error threshold. This is
the maximum error allowed before
a DICOM calibration is required.
Time elapsed since latest
compliance check Shows the backlight runtime since
last compliance check.
Display Function Shows the current display
function.
Ambient light compensation Shows the ambient light
compensation status.
Reading Room Shows the selected reading room.
Luminance
Shows the measured luminance.
DICOM Compliance Status (status
since last compliance check)
Black luminance Shows the measured backlight
luminance.
No calibration executed yet. No other information is visible DICOM Calibration Status
Calibration executed. When the calibration is executed,
the following extra information
is shown: Backlight runtime
elapsed since latest calibration,
display function, ambient light
compensation, reading room.
Display function Shows the current display
function.
Ambient Light Compensation Shows the ambient light
compensation status.
Current DICOM Settings
Reading room Shows the selected reading room.
To retrieve the DICOM status report:
1. Bring up the OSD main menu.
2. Navigate to the Con fi guration > Calibration > Embedded QA menu.
3. Select DICOM status report to make the information visible on the screen.
5.17.3 DICOM compliance check
About DICOM compliance check
The DICOM compliance check will measure the DICOM curve of your display in different steps. After
measurement, the DICOM status report is shown.
To start DICOM compliance check:
1. Bring up the OSD main menu.
2. Navigate to the Con fi guration > Calibration > Embedded QA menu.
3. Select DICOM compliance check to start the compliance check.
Warning: Pressing a key during the compliance check will abort the check.
K5902074 CORONIS 5MP LED DISPLAY 19/12/2014 27