![background image](http://html1.mh-extra.com/html/barco/imagepro-ii-jr/imagepro-ii-jr_user-manual-addendum_3876304027.webp)
12
ImagePRO-II • User’s Guide
2. Hardware Orientation
ImagePRO-II Rear Panel
rëáåÖ=cêçåí=m~åÉä=_ìííçåë
Pressing a front panel button once causes that button to light up. If the button is associated
with a menu system, the display shows the top-level menu for that button. For example,
pressing
SEL
at the
Status Menu
displays the
Setup Menu
. If the button performs a
function, that function begins. For example, pressing
ESC
exits a menu or cancels an
operation immediately.
There are three button states:
•
Lit
– Button is selected.
•
Dim
– Source or logo is present but not active.
•
Not lit
– Button is not selected.
fã~ÖÉmolJff=oÉ~ê=m~åÉä
The following figure illustrates the ImagePRO-II
rear panel.
Figure 2-6.
ImagePRO-II Rear Panel
19
3
6
1
4
7
5
9
10
12
13
14
18
11
2
17
16
8
15
100-240 VAC 50-60 H z 2a
1
2
5
In SDI Loop
SDI Out
Com posite Out
In 3 HDM I
In Universal DVI-I Loop
In Universal Analog Loop
Ethernet
HDM I Out
DVI-D Out
Analog Out
In Genlock Loop
DP Out
In 4 DP
In SDI 6
In SDI Loop
SDI 2 Out
S3D In
S3D Out
Audio I/O
1)
10)
2)
11)
3)
Input 1 — DVI-I Input with Loop-through
12)
4)
Input 2 — Analog Input with Loop-through
13)
5)
14)
6)
15)
7)
Input 5 — SDI-1 Input with Loop-through
16)
8)
Input 6 — SDI-2 Input with Loop-through
17)
9)
18)
Genlock Input BNC with passive Loop-through
19)