ImagePRO-II • User’s Guide
113
4. Menu Orientation
Operating the ImagePRO-II in Dual-Channel Mode
dÉåäçÅâ=pÉííáåÖë=áå=aì~äJ`Ü~ååÉä=jçÇÉ
Using the
Output > Genlock Submenu
in dual-channel mode, you can lock Channel B to
Channel A, so that the sources remain in sync, or you can set Channel B to Freerun to
remove this lock. In dual-channel mode, the
Genlock Submenu
looks like the one in the
following illustration.
Figure 4-109.
Genlock Submenu in Dual-Channel Mode
To change Genlock settings in dual-channel mode:
1)
Select
Output > Genlock
.
The
Genlock Submenu
appears. The first field shows the Channel A source for
the selected input.
2)
If required, change the Channel A source. The options are:
~
Another input
~
Ext(ernal)
~
Freerun
3) CHB
Source
defaults to
Lock to A
. With this option, Channel B remains locked to
Channel A at all times, regardless of the Genlock source selected for Channel A.
If desired, this field can also be changed to Freerun in order to disable the locked
association with Channel A.
4)
The
H/V Offset Submenu
enables the independent adjustment of H and V offset
for each channel.
5)
You can view the current lock status for Channel A and B in the last two fields of
the
Genlock Submenu
.
G E N L O C K
> C H A S o u r c e I n 6 ( S D I - 2 )
C H B S o u r c e
L o c k t o A
H / V O f f s e t > >
H D - 1 5 S C P h a s e n / a
C o m p S C P h a s e n / a
C H A S t a t u s N o S y n c
C H B S t a t u s L o c k e d