ImagePRO-II • User’s Guide
109
4. Menu Orientation
Operating the ImagePRO-II in Dual-Channel Mode
Figure 4-100.
Save Output Config Prompt
6.
Press
SEL
at this prompt if you want to save the output format to non-volatile
memory.
The
Out Save Config
prompt appears, as shown in the following illustration.
Figure 4-101.
Out Save Config Prompt
7.
In the
Channel
field, select an option. The choices are
A
,
B
, and
All
.
To save your configuration for use by the outputs on only one channel, select the
channel.
To save your configuration for use by the outputs on both channels, select
All
.
8.
Scroll to
Save Config
, and press
SEL
. The “Config Saved” message appears at
the bottom of the prompt.
^ÇàìëíáåÖ=lìíéìí=qáãáåÖ=áå=aì~äJ`Ü~ååÉä=jçÇÉ
In dual-channel mode, the
Output > Timing Adjust Submenu
includes a field labeled
Channel, as shown in the following illustration.
Figure 4-102.
Output Timing Adjust Submenu in Dual-Channel Mode
On this menu, you can adjust timings for a channel independently. All outputs mapped to a
channel take that channel’s timings.
^ÇàìëíáåÖ=lìíéìí=bÑÑÉÅíë=áå=aì~äJ`Ü~ååÉä=jçÇÉ
In dual-channel mode, you can set contrast, brightness, color balance and other effects on
a per-channel basis. All outputs mapped to the channel take these settings. In this system
mode, the
Output > Effects Submenu
looks like the one in the following illustration.
Save Output Cfg?
> <SEL> = Yes
<ESC> = No
O U T S A V E C O N F I G
B
> C h a n n e l
B
S a v e C o n f i g
OUT TIMING ADJUST
A
> Channel A
H Total
2200
H Position
192