Barco IEX Series, Инструкция по установке и эксплуатации

Страница: 8 / 80

R5915190 /01 IEX series 8
1.1 Safety guidelines
Personal protection
WARNING: Ensure you understand and follow all the safety guidelines, safety instructions,
warnings and cautions mentioned in this manual.
WARNING: Be aware of suspended loads.
WARNING: Wear a hard hat to reduce the risk of personal injury.
WARNING: Be careful while working with heavy loads.
WARNING: Mind your fingers while working with heavy loads.
Installation personnel
This installation must be performed by authorized and qualified technical personnel only.
Accredited safety officers must ensure the safety of the site, construction, assembly, connection, use,
dismantling, transport etc. of such safety critical systems.
Operator
The products specified in the manual only can be operated and used by the professional who meets the
requirements for this work.
The operator shall obey the instruction in this document, especially the safety and warning note herein. Due to
the relevant training and experience, professional have a more in-depth understanding of this product, they
can avoid the risk of the process of the operation.
The non-professional shall not assembly and disassembly at their own discretion, in case of high-voltage
electric shock.
Caution
Installation should be performed only after you are thoroughly familiar with all of the proper safety checks and
installation instructions. To do otherwise increases the risk of hazards and injury to the user.
Assembly parts are designed for intended use only in conjunction with IEX displays.
Do not modify and/or replicate any component. Barco uses specific materials and manufacturing processes in
order to achieve part strength. Consult Barco for assistance with custom applications.
Always follow Barco installation instructions. Contact Barco if you should have any question regarding the
safety of an application.
The manufacturer assumes no liability for incorrect, inadequate, irresponsible or unsafe assembly of systems.
The system must comply with the local safety regulations regarding environmental conditions, solidity final
construction, etc
…
Notice on safety
This equipment is built in accordance with the requirements of the international safety standard IEC60950-1,
which is the safety standard of information technology equipment including electrical business equipment.
This safety standard imposes important requirements on the use of safety critical components, materials and
insulation, in order to protect the user or operator against risk of electric shock and energy hazard and having
access to live parts. Safety standards also impose limits to the internal and external temperature rises,
radiation levels, mechanical stability and strength, enclosure construction and protection against the risk of
Safety