Barco iD PRO R600+, Руководство пользователя

Страница: 97 / 179

6. Advanced
The aspect ratio setting is greyed out when enabling the full screen representation.
6.9.2 Startup screen
What can be done ?
When the startup screen is enabled, the identification screen is displayed for a few seconds at startup. This startup screen can also
be disabled.
Image 6-111
How to enable/disable the Startup screen?
1. Press MENU to activate the Tool bar
2. Press → to select the
Display setup
item
3. Press ↓ to Pull down the
Display setup
menu
4. Use ↑ or ↓ to select
Startup screen
5. Press → to pull down the menu
6. Use ↓ or ↑ to select the ON or OFF
7. Press ENTER
6.9.3 Textbox
What can be done ?
The textbox function allows to display or not the different sliderboxes used for instance for picture settings (contrast,...), it also affects
the source information windows (displayed in the right lower corner of the screen).
How to enable/disable the Textbox ?
1. Press MENU to activate the Toolbar
2. Press → to select the
Display setup
item
3. Press ↓ to Pull down the
Display setup
menu
4. Use ↑ or ↓ to select
Textbox
5. Press → to pull down the menu
6. Use ↓ or ↑ to enable/disable the textbox
7. Press ENTER
6.9.4 Take screenshot
What can be done ?
A screenshot can be taken from an active projected image. This screenshot is then saved in a 4 MB RAM and can be used as
background.
Each new screenshot erases the previous logo therefore a warning message is displayed asking the user to confirm.
R5976874 ID PRO R600/R600+ 21/09/2006 91