Barco iD H250, Руководство по обслуживанию

Страница: 58 / 108

5. Electronic spares and servicing procedures
1
8 7 9
12
13
14
19
21
15 17 18 16
2 3 4 5 6
red orange
orange green
1 2 3 4
Image 5-48
Diagnostic LED’s on the power box
LED
number
LED color Description
1
orange
ON when +12V is active (active state of the projector)
2
green
ON when ++12V is active (standby state of the projector)
3 red ON if the power box sends an interrupt to the projector control and the projector control does
not read this interrupt
4
orange
BLINKS (with a frequency of 1 sec) when the power box control is OK
5.7.3 Replacing the power box
Necessary tools
long screwdriver Philips Ph1
How to remove the power box?
1. Remove the PMP
2. Remove the input module
3. Remove the lamp cover
4. Loosen the four screws on the bottom of the power box. These screws are fixed to the power box and can not fall out.
54 R59770097 ID H250 / H500 15/05/2007