5. Electronic spares and servicing procedures
•
First stage of startup:
LED 1
(red) and
LED 5
(red) are
ON
In case of system failure during this stage, LED 1 stays ON and LED 5 starts blinking.
•
Second stage of startup:
LED 1
(red),
LED 3
(red) and
LED 5
(red) lare
ON
•
Third stage of startup (user program startup):
LED 1
(red) and
LED 5
(red) are
ON
•
End of startup cycle (projector is ready to receive commands):
LED 1
(red) is
ON
LED diagnostics
Image 5-34
PMP: diagnostic LED’s
LED
color
description
1
red
ON during standby of the projector
2
green
ON during IR acknowledgement
3
red
ON in case of power box failure or lamp error
5
red
ON during boot sequence
6
green
BLINKING during the cooling down time of the lamps
5+6
orange
ON during update
2+4+6
green
BLINKING while powering on the projector
2+4+6
green
BLINKING x times in turn to indicate projector address while in standby (see owner’s manual)
1+5
red
ON during the 1st and 3rd stage of the startup cycle
1+5
red
LED 1 is ON, LED 5 is BLINKING when a system failure occurred during the 1st stage of the startup
1+3+5
red
ON during the 2nd stage of the startup cycle
7
green
Ethernet link between PMP and ethernet switch on PMP established
8
red
sending or receiving a package of information via Ethernet
others
red
ON if the according FPGA is not configured well
46
R59770097 ID H250 / H500 15/05/2007
Содержание iD H250
