Barco ICP-D, Руководство по установке

Страница: 34 / 54

R5912083 /01 ICP-D 34
3.12 Series 2 projector software update
How to update the software on series 2 projector
1. Download the latest firmware from the Barco website.
Click on myBarco and login to get access to secured information. Registration is necessary.
If you are not yet registered, click on New to myBarco and follow the instructions. With the created login
and password, it is possible to login where you can download the software.
Note: Keep in mind to unzip the package. Only *.fw files can be selected for software updates.
2. Switch on the projector.
The projector can now be switched on. Place the ON/OFF switch of the projector in the ” I ” position. As a
result the projector starts to initialize. The status lights of the projector lights up GREEN once the projector
is initialized. In case the status lights up RED may indicate a tamper event during transport. If so, contact
Barco customer service.
3. Download and install the latest version of Communicator. The program can be downloaded for free from
Barco's website, (URL:
http://www.barco.com ). Click on myBarco and login to get access to secured
information. Registration is necessary.
If you are not yet registered, click on New to myBarco and follow the instructions. With the created login
and password, it is possible to login where you can download the software.
4. Download the latest firmware from Barco's website in the same way as for Communicator.
5. Start Communicator and make a connection with the projector. For more information, consult the
Communicator user guide.
6. Login as service technician and click on tab Maintenance and select Software update .
7. Click on Launch DC update companion .
8. Click Next , accept the license agreement and continue following the wizard.
ICP-D installation