Barco HDX series Скачать руководство пользователя страница 69

Страница: 69 / 351

5. Getting started

5.3

Power on projector

How to power on.

1. Press the power switch at the back of the projector to switch on this projector.

Image 5-2
Main switch

When ’0’ is pressed, the projector is switched off.

When ’1’ is pressed, the projector is switched on.

The projector starts up in standby. The menus are accessible via the local LCD panel.

The start up screen is displayed on the local LCD panel and when fully started up, it changes to the overview screen.

Image 5-3
Start up screen, Main

This screen indicates :
-

the selected Main input

the selected PIP input

the IP address

the Customer Id

the Lamp status

the Mains voltage

the current ambient temperature

the Text status (OSD)

To display an image, the standby key must be pressed once.

R5905032 HDX SERIES 01/06/2011

Содержание HDX series
































































































































































































































































































































































Результаты поиска

Содержание HDX series

Отзывы:

Barco HDX series, Руководство по установке, Страница: 69 / 351

Результаты поиска

Содержание HDX series

Отзывы: