Barco HDF-W30LP, Руководство пользователя и инструкция по установке

Страница: 191 / 311

17. Alignment
4. To adjust a value once selected, use the ◄ or ► key to change
Or,
press
ENTER to open a separate adjustment window.
Use the arrow keys to make the adjustment.
Image 17-24
Warping, keystone
About Warp area
2 1 3 4 5 6
Image 17-25
Warp area
1 Full screen
2 Right side
3 Bottom side
4 Left side
5 Top side
6 4 quadrants
About Warp mode
2 1 3 4 5 6 7
Image 17-26
Warp mode
1 Keystone
2 Linearity
3 Points
4 Scale
5
Shift
6 Rotate
7
Rotation point
17.7.8 Keystone correction work fl ow
Adjusting vertical and horizontal keystone
1. Select the 2 x 2 adjustment level. See "Setting the warping level", page 185.
The default selected anchor point is the left top corner of the image.
2. Select the desired warp area.
Depending on the selected area only the points in that area will be adjusted.
3. Select keystone .
4. Select within Warp Adaptations , Horizontal
or Vertical to adjust the corresponding keystone.
R5906730 HDF WLP SERIES 01/08/2017 187