Barco HDF-W30LP, Руководство пользователя и инструкция по установке

Страница: 157 / 311

14. Image
- Automatic : correct fi le will be loaded automatically.
- Manual : correct fi le should be loaded manually.
- Custom only : correct fi le will be loaded automatically out of the available custom fi les.
14.6.9 Image fi le service options, Auto Picture Alignment
How to set
1. Press Menu on the remote control (RCU) or on the local keypad to activate the menus and select Image → Image File Services
→ Options → Auto Picture Alignment .
Image 14-52
Image
fi le services, Options
Image 14-53
File options, Auto Picture Alignment
2. Press ENTER to toggle between [Off] , [Always] or [Load File] .
- Off : auto picture alignment deactivated.
- Always : auto picture alignment is always activated.
- Load fi le: when new fi le is loaded for the selected source.
14.7 Save custom settings
What can be done ?
The current custom settings can be saved to internal backup device in the same way as it would be done when the projector light
source was switched off.
When settings are changed when the light source is off, a manual Save custom settings must be executed to save the changes.
When the message Save changes is displayed, newer switch off the projector.
How to save
1. Press Menu on the remote control (RCU) or on the local keypad to activate the menus and select Image → Save Custom Settings
The Save Custom Settings menu is displayed.
2. Use the ▲ or ▼ key to select Yes and press ENTER .
Image 14-54
Save custom settings, question
14.8 Splash image
About a splash image
When splash image is on, a dedicated image is displayed after start up and before the normal image is displayed and that for a
certain time.
R5906730 HDF WLP SERIES 01/08/2017 153